SIEMENS, DF&PD

Предыдущее посещение: Сб июл 02, 2016 4:11 Текущее время: Сб июл 02, 2016 4:11

Часовой пояс: UTC + 3 часа




 [ Сообщений: 7 ] 
Автор Сообщение
 Заголовок сообщения: архивирование действий опереатора
СообщениеДобавлено: Чт янв 27, 2005 12:11 
возможно ли в WinCC v6 архивирование действий оператора с возможносью их последующего разбора


Вернуться к началу
  
 
 Заголовок сообщения:
СообщениеДобавлено: Чт янв 27, 2005 12:57 
Не в сети
Известный Писатель

Зарегистрирован: Вс янв 09, 2005 13:28
Сообщения: 116
Откуда: Россия
Возможно - создавайте на каждое действие оператора соответствующее сообщение. Как создавать написано в хелпе и на форуме.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения:
СообщениеДобавлено: Вт фев 01, 2005 11:51 
Не в сети
Ведущий специалист

Зарегистрирован: Пт дек 31, 2004 13:25
Сообщения: 2248
Откуда: SIEMENS I IA AS Москва
Есть опция WinCC Audit, которое предназначено для регистрации действий пользователей как в рантайм, так и в среде разработки.
Описание этой опции есть в http://www.automation-drives.ru/as/down ... inCC_r.pdf и
http://www.automation-drives.ru/as/down ... inCC_e.pdf на (стр.83).


Вернуться к началу
 Профиль  
 
 Заголовок сообщения:
СообщениеДобавлено: Пт апр 13, 2007 15:05 
Не в сети
Начинающий писатель

Зарегистрирован: Вс окт 22, 2006 11:25
Сообщения: 70
Откуда: Москва
Подскажите, где можно прочитать про WinCC Audit?
Указанные выше ссылки не рабочие.
Входит ли эта опция в поставку WinCC 6.0 SP4 или ее нужно приобретать отдельно?


Вернуться к началу
 Профиль  
 
 Заголовок сообщения:
СообщениеДобавлено: Пн апр 16, 2007 10:27 
Не в сети
Известный Писатель

Зарегистрирован: Чт окт 26, 2006 7:38
Сообщения: 108
Откуда: Нск
1.0 SIMATIC WinCC/Audit V6.0 - Objective

To sell pharmaceutical products nowadays, the manufacturing process must meet requirements that are stipulated by the Food and Drug Administration in Guideline 21 CFR Part 11 and concern the points access control, change management and data storage.
For WinCC, this results in very specific requirements with regard to the handling of electronic data:

Relevant data - if it is electronically stored - must be protected against unauthorized changes
It must be clear what kind of changes were made to the system by whom, when and why (Audit Trail)
With the "FDA options" WinCC/Audit and SIMATIC Logon as well as appropriate measures during the engineering phase (documented in a White Paper), SIMATIC WinCC V6.0 fulfills the requirements set forth in FDA 21 CFR Part 11 for the pharmaceutical and food industries (FDA = Food and Drug Administration) and can thus be employed in systems that are to be validated by the FDA.
The options greatly simplify the validation/revalidation of systems and deliver the most comprehensive and convincing answer to the requirements in these industries. WinCC/Audit is a software option package for the creation of audit trails (change tracking) during engineering and in runtime (project operation and changes).

WinCC/Audit is also employed everywhere operator activities and configuration changes require traceability. This, for example, is the case in all systems with quality control measures.

WinCC/Audit also comes with a document management program, which enables the management of WinCC configuration data (screens, functions, etc.) as well as any customer data. For the customer, this makes the setup of a separate document management system such as MS SourceSafe unnecessary.

2.0 Components of WinCC/Audit

2.1 Audit Configuration
The configuration environment of WinCC/Audit enables the setup of MS SQL Server audit trail databases. They can be local or remote. In these databases, all documentation-requiring entries from the runtime and configuration operations of WinCC are made change-protected.
Audit CS permits the configuration of which WinCC RT situations need to be audited. It is very easy to configure operator messages at WinCC objects, without having to change to the graphics system. Thus, it is possible to configure the RT audit trail after the actual WinCC project has been created. It is also possible to create audits for objects, for which no operator messages can be configured in WinCC. The settings made in Audit CS become effective in Audit Runtime. For this, the RT project plus these settings can be transferred to an RT machine, which only requires an Audit RT license.

All changes made to the WinCC configuration are also recorded in the audit trail database. At a minimum, the originator, logged on user, timestamp, old value and new value are recorded for each event. This recording results in an enormous time saving for applications, in which every change needs to be documented. This change management provides transparency during the engineering process and greatly simplifies the revalidation following engineering changes.

Audit RC contains the following components:

Configuration of Audit Trail Databases
Setup of CS Audits, RT Audits and Operator Activities
Document Management
Custom Audit Functions (C, VBS)
Audit Viewer as Application and OCX
Runtime Auditing Engine
WinCC Audit API (for external applications that want to store their audit trails in WinCC/Audit)
Audit RC is typically installed on a single-user system or the WinCC server of a distributed system. However, it is also possible to install Audit RC on one or multiple WinCC clients (everywhere project changes are performed).

2.2 Audit Runtime
After setting the appropriate properties of WinCC/Audit on a machine with an Audit RC license, this project can be transferred to a WinCC RT machine, on which Audit RT must be installed for a complete RT audit trail setup.
Audit RT contains the following components:

Runtime Auditing Engine
Custom Audit Functions (C, VBS)
Audit Viewer as Application and OCX
WinCC Audit API (for external applications that want to store their audit trails in WinCC/Audit)
Audit RT must be installed on all WinCC machines that trigger audit-requiring events. In a client-server installation, this includes the server and ALL clients.

If external applications are to store their audit-requiring events in the audit database, Audit RT can also be installed and licensed on a non-WinCC machine.

Audit RT also detect attempts of falsification, e.g. if external changes are made to the archive data via OLE DB, ODK or similar.

2.3 Document Management
The Audit configuration system includes a document management application. It is primarily employed for storing file-based data (e.g. WinCC screens). In addition, it is also possible to record any customer-specific data.
All this data can be checked in and checked out from a secure database. The complete history is maintained. It is possible to compare different versions and go back to an earlier version. The document management database is contained in the WinCC project and can thus be transferred across computers. Backup and restore functions are also available.

2.4 Audit Viewer
With the Audit Viewer it is possible to filter and display events from any audit database. The database is typically accessed remotely. Because of this, the Audit Viewer is a "thin" application independent of WinCC. As an alternative, the Audit Viewer can also be embedded as an ActiveX Control into any container application (WinCC, Web Navigator, Internet Explorer, etc.).
The Audit Viewer provides access to all recorded audits from Runtime, engineering and document management. Audits can be printed out or exported to Excel (in CSV format).

2.5 Openness
WinCC/Audit contains documented API calls that enable the use of the Audit features in external applications. With them it is possible to record external data in the document management and to log events from external applications in the Audit database.
It is also possible to gain read-access to the Audit database via OLE DB. This makes it very easy to send audit trails to WinCC reports or any external application.

2.6 Security
WinCC/Audit is completely access-protected. A built-in user administration only grants access to authorized users. For FDA applications requiring the use of SIMATIC Logon, it is used instead. SIMATIC Logon is fully integrated into the security concept of Audit.

2.7 Licensing
The licensing is carried out via software keydisks.

Audit RT must be installed on any WinCC RT/RC machine that writes runtime events into the audit trail. This applies to servers as well as all WinCC clients.

Audit RC must be installed on any WinCC RC machine, on which WinCC is configured and needs to be logged as well as on WinCC machines, on which the settings of Audit can be changed. Audit RC comes with a Audit RT license.

On a non-WinCC machine, on which an external application creates audits and stores them in the central WinCC audit trail, an Audit RT license is required as well.

The Audit Viewer itself can be distributed license-free.

3.0 Setups

3.1 Single-User System
WinCC/Audit can be operated on single-user systems. In this case, WinCC, Audit and the Audit Viewer are located on the same machine. The audit trail and document management databases are kept on the local PC.
On a single-user system, Runtime as well as the Audit Configuration and the document management can be run according to the installed license.

3.2 Multi-User System
In a multi-user system, Audit is installed on all participating WinCC machines (clients and servers). It is irrelevant whether the clients have or do not have a project. The audit trail and document management databases are usually located on the server.
Pure Runtime operation as well as Audit Configuration and document management can be run on one/multiple servers or clients according to the installed license.

3.3 Central Audit Server
It is possible to run WinCC/Audit as a central audit trail server. In this case, the audit trail database is maintained centrally on any PC with MS SQL Server 2000 SP3 (included in the delivery scope of WinCC V6.0). As a result, all networked WinCC devices can centrally store their audits.

4.0 Installation Requirements

4.1 Hardware Requirements
Since WinCC/Audit is generally installed on WinCC stations, the same hardware requirements as for WinCC apply.

4.2 Software Requirements

Windows XP Professional with Service Pack 1 or

Windows 2000 SP3

WinCC V6.0 SP1

MS SQL 2000 SP3 (included in the delivery scope of WinCC)

Internet Explorer 6.0 (for print preview and printing)

Excel XP (for the export of the audit trails to Excel)

5.0 Quantity Schedule

There are no quantity limitations with regard to:

The number of audits
The number of audited servers
The number of simultaneously accessing viewers
6.0 Operation with SIMATIC Logon

WinCC/Audit can be run with the SIMATIC Logon Service V1.1 on one machine. In such cases, the Audit-internal user administration is deactivated.
For the application in regulated industries, the use of SIMATIC Logon is required.
Please consult the Sales/Delivery Release of SIMATIC Logon (see 17574396).

7.0 Delivery Scope and Ordering Data

The delivery of WinCC/Audit V6.0 includes a CD-ROM, an authorization disk and the license certificate. The documentation in five languages is contained on the CD-ROM. A separate paper copy is not available. Product Name
Order Number

WinCC / Audit RT V6.0
6AV6 371-1DV06-0AX0

WinCC / Audit RC V6.0
6AV6 371-1DV16-0AX0



The ordering data for WinCC V6.0 SP1 and SIMATIC Logon V1.1 can be found in the corresponding Delivery Releases (see 17066503 and 17574396).


Вернуться к началу
 Профиль  
 
 Заголовок сообщения:
СообщениеДобавлено: Вт апр 17, 2007 9:10 
Не в сети
Начинающий писатель

Зарегистрирован: Вс окт 22, 2006 11:25
Сообщения: 70
Откуда: Москва
Это я уже видел. Мне интересна ссылка на документацию.

Входит ли эта опция в поставку WinCC 6.0 SP4 или ее нужно приобретать отдельно?


Вернуться к началу
 Профиль  
 
 Заголовок сообщения:
СообщениеДобавлено: Вт апр 17, 2007 9:58 
Не в сети
Известный Писатель

Зарегистрирован: Чт окт 26, 2006 7:38
Сообщения: 108
Откуда: Нск
Заказывается отдельно, для работы с ним нужны авторизации на Audit RT и Audit RC. Дистриб занимает 130 Мб.


Вернуться к началу
 Профиль  
 
Показать сообщения за:  Поле сортировки  
 [ Сообщений: 7 ] 

Часовой пояс: UTC + 3 часа


Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 4


Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения

Перейти:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group